R&D

Material

BMNano Material

Compound

Application and Development of Functional Macromolecule Composite Materials

Testing

Unvulcanized Rubber TestCuring Characteristic TestVulcanized Rubber TestChemical Analysis

Laboratory

Contact Us

  • Otsuka Material Science and Technology (Shanghai) Co.,Ltd.
  • Address1st Floor AB Area,Building No.10,No.471 Guiping Road, Xuhui District, Shanghai
  • Tel+86-21-60917675
  • Fax+86-21-61912937
  • E-mailomst@cn.otsuka.com
  • Websitehttp://www.otsukamst.com.cn

Curing Press

Name: Curing Press Application: Vulcanization of various kinds of rubber specimens Parameters: Pressure: 50T Hot plate spacing: 125mm Temperature range: RT~+200℃ Temperature Precision: ±0.5℃ Woking layer: 2 layer Features: The he...

Learn More >

Open Mill

Name: Open Mill Application: Rubber plastification, mixing and sheeting Parameters: Cylinder Diameter: 200mm Cylinder length: 430mm Cylinder Nip range: 0.1-8mm Speed Ratio: variable Temperature Precision: ±1℃ Features: The cylinde...

Learn More >

Internal mixer

Name: Internal mixer Application: Rubber mixing Parameters: Volume: 1.5L Rotor Speed Ratio:1.152:1 Maximum Speed:100r/min Pressure of RAM:0.6-1.0MPa Features: The mixers’ rotor speed, rotor temperature, chamber temperature and etc....

Learn More >

Aging Tester

Name: Aging Tester Test Item 1: Aging test of uncured and cured compounds Test purpose: Evaluate the property evolutions before and after aging Test Item 2: Permanent Compression Set Test purpose: Measure the permanent compression deformation...

Learn More >

Temperature and humidity regulated oven

Name: Temperature and Humidity Regulated Oven Test Item: Aging resistance properties Test purpose: Measure the material’s aging resistance properties by simulating the environmental conditions during its usage. ...

Learn More >

DisperTester

Name: DisperTester Test Item: Filler Dispersion Test purpose: Observe the dispersion of fillers (carbon black and etc) in the compound and evaluate the mixing quality of the compound. ...

Learn More >

Specific Gravity Balance

Name: Specific Gravity Balance Test Item: Density Test Purpose : Measure the specimen’s density ...

Learn More >

Rebound

Name: Resilience Test Item: Resilience Test purpose: Measure the hysteresis loss of the compound by pendulant method. ...

Learn More >

ShoreA

Name: Shore A Test Item: Shore A hardness Test purpose: Measure the anti-penetration ability of the compound, evaluate its hardness. ...

Learn More >

Akron

Name:Akron Test Item: Akron Abrasion Test purpose: Test the wear and abrasion resistance of the compound ...

Learn More >

Mooney Viscometer

Name: Mooney Viscometer Test Item 1: Mooney Viscosity Test Purpose: Measure the uncured compound’s viscosity at 100C and evaluate its processability Test Item 2: Mooney Scorch Test Purpose: Measure the scorch time of the uncured compou...

Learn More >

Rheometer

Name: Rheometer Test Item 1: Curing Kinetics Test purpose: Measure curing speed and curing time Test Item 2: RPA Test purpose: ① Measure the rheological properties of uncured compounds under certain temperature, deformation and frequ...

Learn More >
Total 2 Page 14 Records 12
Product Catalog